Engine trim alert wont stop on C-10

[Pioneer22]

I am getting an almost non-stop alert on my C-10 showing / reporting my engine trim (DF 250). I have tried "re-set to factory". Cant find a line item for "trim alert" Any ideas?

[Moonlighter]

Replied to your PM.

[Moonlighter]

I would add - if the trim position is displaying correctly, go into the Alarms menu on the C-10 and see what you find. You may see an active alarm that you can cancel there, or if you can find an option for trim alarms you may simply be able to turn it off.

Its a strange one, I have not seen or heard of this before.

Logically, something is generating the alarm…. Whats appearing on the gauge is likely a result of something happening that shouldnt be.

So, if the above suggestion doesn’t reveal anything, then I would shift my focus from the gauge and look for causes - possibly a damaged wire or corrosion in a trim plug or in the switch on the engine, or the trim switch on the controls, that kind of thing. Check all the harness connections that could carry signals from the trim sender on the engine to the gauge harness and to the engine controls.