A year ago I ordered a replacement prop to keep as a spare and decided to change out the prop today. The new prop fits(tightly, had to kind of help it along with a 2x4) but is approximately an inch shorter then the old one so the end of the shaft slightly protudes past the prop.. Is this ok? Appreciate any insight! This is a df50
Announcement
Collapse
No announcement yet.
prop
Collapse
X
-
Yes it is, its attached to the prop, rubber spacer. the prop itself is actually about an inch shorter then the current one which dosen't have a spacer. The inside of the current prop is spaced away from the lower unit approx 2" whereas the new one is only 3/4". and the spacer is about 1/2". I'm worried that this will affect the driveablity/ performance of the boat.
Comment
Comment