Tweet
I have obtained two dt150 super sixes, one has just been rebuilt and has oiling system disabled. The other has piston damage and has complete oiler system, I would like to remove oiling system from the bad engine and reinstall it on good engine rather than premix. Any thoughts or assistance would be greatly appreciated.
-
-
Take pics how everything comes apart, make sure it all goes together just like it came apart. Make sure all the check- valves in the oil lines are going the right direction. Purge the oil pump per the manual.
Once you're sure everything is right, then run pre-mix while checking oil usage/level in tank. Check plugs frequently too, as some cylinders may take longer to get oil from tank. Then you can start adding straight gas to the pre-mix tank, all the oil/smoke should start clearing up the more fresh gas you add.
Keep checking oil level in tank, and plugs to see how each cylinder is doing.
Good luck. -
good advice thank youComment
Comment