Tweet
this are twin 2010 df300;s . I enjoyed over year of trouble free operation after fixing white wire issue.
Now i have a new peculiar problem. STB engine operates as it should.
Port side engine gives me message "low voltage" and it shows 0.0 V on the gauge. Symptoms are as follow;
1.will not start (obviously)
2. starter turns engine w/o problems
3. tilt on the engine does not work
4. remote tilt does not work
5. In the engine fuse holder - 30 amp fuse and relays (ecm and main) are all good (have continuity) and getting full power (13V)
6. Batteries are brand new and 13-14 V
I'm guessing this is not a white wire issue as it would affect both engines. Any ideas would be appreciated.
Now i have a new peculiar problem. STB engine operates as it should.
Port side engine gives me message "low voltage" and it shows 0.0 V on the gauge. Symptoms are as follow;
1.will not start (obviously)
2. starter turns engine w/o problems
3. tilt on the engine does not work
4. remote tilt does not work
5. In the engine fuse holder - 30 amp fuse and relays (ecm and main) are all good (have continuity) and getting full power (13V)
6. Batteries are brand new and 13-14 V
I'm guessing this is not a white wire issue as it would affect both engines. Any ideas would be appreciated.