New Suzuki multifunctions Gauge issue (Not C10)

[tomille3]

Hi everyone
I have problem with my new both square Suzuki multifunction gauges (Not C10 gauge)

Every functions are working (fuel consumption, Hours, trip hours, fuel flow...etc) except those one:
-ECON AV
-ECON
-TRIP
- Lat ---°-----°---N
Long---°----°---E

I have a DF200ap with a HDS9 Carbon and all connected with NMEA2000

Any idea of the issue ?

[artdf175]

Moonlighter is the expert in this area
But.. is your GPS working ok?
Sounds like your multifunction guage is not configured to see the GPS
Art

[tomille3]

Yes , my GPS is working fine
It must be something not activate , but I couldn't find what

[Moonlighter]

Im am not familiar with the new Suzuki OEM gauge that you have, but it sounds very much like a data source issue.

Have you checked the gauge data sources for speed it should be set to SOG or the lowrance? Do some digging in that area and see what you can find.

[tomille3]

I'll check
In the gauges documentation, they're only says that it need to be connected with a GPS .......

[tomille3]

I found out !!

on the speed display of the Suzuki Multifunction gauge , you can choose "water" ON - OFF

In my case, "water" was selected ON

So I switch it to OFF position .

Then automatically , the indication "GROUND" will appear , then the GPS position Lat & Long are displayed and all other data also

So everything is now OK

[Moonlighter]

Good work! It had to be a data source setting!!