My freshly serviced 140 was dropped in last week and is having issues starting. At first it turned over and ran for another two minutes before starting to sputter out and die. We had to prime the engine with the bulb (which is hard) as we motored in order to get the motor to work long enough to get to the slip.
I did change the water/fuel separator assembly and filter prior to dropping it in, but I was sure to flood the filter and pumped/primed the fuel line with the bulb to ensure no air in the line.
The motor will not start at all now and if it finally catches after a few seconds of the starter working it dies immediately after that. I called the dealer and they said it could be bad gas and for me to pull the boat out and take it back to them to have a look but I really don’t want to go through the trouble of getting a tow back to the ramp, not to mention having to wait 3 weeks for them to get to me. Please help.
I did change the water/fuel separator assembly and filter prior to dropping it in, but I was sure to flood the filter and pumped/primed the fuel line with the bulb to ensure no air in the line.
The motor will not start at all now and if it finally catches after a few seconds of the starter working it dies immediately after that. I called the dealer and they said it could be bad gas and for me to pull the boat out and take it back to them to have a look but I really don’t want to go through the trouble of getting a tow back to the ramp, not to mention having to wait 3 weeks for them to get to me. Please help.
Comment