Tweet
Following on from Moonlighters post.....
For the 2017 model suzuki's (mine are DF200APX's) in the US the "dual engine adapter" has a built in positive and ground for power supply to the NMEA network - these are gray and black wires. They can be connected to the power drop lines that come out of the main harness under the dash - in the photos - you will see they are also gray and black and the end fittings are covered and sealed with a greenish / clear plastic sheath.
The adapter cable has a grey coloured 6 pin plug at one end - (only 4 of the pins are used). This plugs into a black 6 pin plug on the main harness under the dash.
The other end of the dual engine adaptor cable has two 4 pin plugs - one named port and one starboard - see photo. These plug into the 4 pin plugs on the "engine interface cables" - the two pin plugs on the engine interface cables aren't used.
As Moonlighter stated in his post - the power supply can come from the power drop in the main harness or a 12V accessories.
You should then have the engine data available on your MFD or C10 gauge.
For the 2017 model suzuki's (mine are DF200APX's) in the US the "dual engine adapter" has a built in positive and ground for power supply to the NMEA network - these are gray and black wires. They can be connected to the power drop lines that come out of the main harness under the dash - in the photos - you will see they are also gray and black and the end fittings are covered and sealed with a greenish / clear plastic sheath.
The adapter cable has a grey coloured 6 pin plug at one end - (only 4 of the pins are used). This plugs into a black 6 pin plug on the main harness under the dash.
The other end of the dual engine adaptor cable has two 4 pin plugs - one named port and one starboard - see photo. These plug into the 4 pin plugs on the "engine interface cables" - the two pin plugs on the engine interface cables aren't used.
As Moonlighter stated in his post - the power supply can come from the power drop in the main harness or a 12V accessories.
You should then have the engine data available on your MFD or C10 gauge.