80's dt40 no spark.

[Micali]

The motor is oil injected and it has a singlr carb on it.
I had the motor running last fall. It set all winter and this summer I replaced the impeller and now it has no spark. It has never given me any issues firing over. I pulled the plugs and checked for spark but nothing.
I unplugged the kill switch but still no spatk. I made sure the oil tank is filled . What else could I be missing that would cause this?
I dont have a manual to check the cdi or other components. Where is a good place to get one? Id really appreciate any help you might have to offer.

[Murray]

s e l f i x e r d o t c o m all one word has a manual that covers your engine.

[Murray]

Duplicate post deleted

[Micali]

Does anyone have any thoughts on what else I can check on?

[Solarman]

You should check the output from your stator. If no output, maybe rust/corrosion of the flywheel magnets while sitting up? Check plug connections for corrosion, poor connections.

Make sure impeller is wet anytime motor is being turned over when checking outputs.

Good luck, post back on what you find out.