Diagnostic plug.

[andreu10]

Hello everyone.

I have a 2016 DF200 APX and I cannot find the connector to plug the Diag cable.

Can someone help me?

Thanks in advanve

[andreu10]

Hello everyone.

I have a 2016 DF200 APX and I cannot find the connector to plug the Diag cable.

Can someone help me?

Thanks in advanve

No one can help?

[tommybe1]

plug

On my df50 its above the ecu on the right, has a cap on it. hope that helps.

[Nayna32]

Wish I knew. On my 2016 DF140A it's on the port side between the air silencer and starter.

Only option I know of, if no one here knows, is to call a dealer; they will know where it's located.

[Moonlighter]

They are normally found near the ecu and fuse box. They are held in a small rubber holder. Shouldnt be hard to find.

When you do, could you take a photo and post it here for others?

[andreu10]

They are normally found near the ecu and fuse box. They are held in a small rubber holder. Shouldnt be hard to find.

When you do, could you take a photo and post it here for others?

Will try again this weekend.

Of course, if I find it, I will post a picture!

[andreu10]

Hi, I could not find it.

This is a picture of the Port side.

Any ideas?


[IMG][/IMG]

[Moonlighter]

Pretty sure it it the plug directly above the connector with the yellow wires running into it. Small dark grey square plug that is plugged into larger white connector.

I noticed you are in Spain, so can I guess that you have the new Suzuki colour digital gauges?

If that is the case, the diagnostic plug is plugged into the mian harness that goes up to the dash/throttle control, so that is why I am fairly sure that it is that one dircetly above the long plug with the 3 yellow wires going into it.

To connect the laptop cable you have to unplug it from the harness and then connect it to the Laptop cable plug. Dont forget to reconnect it to the harness after you are finsihed.

It looks like this, the grey plug on the right side is the one on the engine

[andreu10]

I am concerned about the possibility of damaging anything if it is not the righ connector.

I am really affraid of it.

[Moonlighter]

Talk to your dealer in that case.

[redlowrey]

Talk to your dealer in that case.

''''''Sorry moonlighter didn't see the message, I have no information or wiring schematic on any thing that late. Surely you would only have to look for a plug with the same end as the cable.

[andreu10]

Hello

I found this connector.

Unplugging it the gauge is disconnected.

Could it be the one for SDS?



Thanks

[Moonlighter]

Yes. Same data for the gauge is for the SDS.

[Greg Moore]

Different layout than my 2013 but my diagnostics plug is right where you see the blue plug with the tag on it in your picture. Are you certain that blue plug isn't just a cap for the diagnostics plug? I don't see any wires on the top portion which makes me believe it's the water proof cover for the diagnostics (the little white tits would be fillers where wires would be)..

It will be the only connector on the motor the diagnostics cable fits, every connector is slightly different so you can't mate with the wrong plug.

[andreu10]

Different layout than my 2013 but my diagnostics plug is right where you see the blue plug with the tag on it in your picture. Are you certain that blue plug isn't just a cap for the diagnostics plug? I don't see any wires on the top portion which makes me believe it's the water proof cover for the diagnostics (the little white tits would be fillers where wires would be)..

It will be the only connector on the motor the diagnostics cable fits, every connector is slightly different so you can't mate with the wrong plug.

Hi, the blue connector is for the reverse turning set up.