Suzuki 25 hp -1980 the engine runs backwards!?

[Rillopro]

Hello.

I find nothing about my problem on google. I'll try it here.
Its an 1980s suzuki 25 hp.
The starter motor turns the flywheel clockwise, as soon as it starts the flywheel turns the other way.
The impeller does not cool the engine at this point. The pull-start also goes clockwise so it is certain that the engine wants to run clockwise.

Ive changed position on the ignition plate and tried to find another setting and ive made it go a few times in the clockwise direction. Then the impeller cools normally. But the engine runs like ****.

I made it run clockwise when i turned the ignition plate clockwise. Checked with an ignition timing lamp and the ignition was off. But to get it right I had to adjust the ignition plate counterclockwise to what I think would be the original setting and if I do, the engine turns counter clockwise... I do not think my new impeller feels good to turn front and back

Anyhow, anyone know what it could be? Thanks for help!!

//Rickard from sweden

193703212_850553655863371_6868635438150627820_n.jpg
194709949_320154142928028_2265145704928827463_n.jpg

[Rillopro]

No one have any ideas??

[Solarman]

Is it possible you could have mounted the timing plate 180° off?

Just asking?

[redlowrey]

This one will test you out I would like to know how the primary winding switches off at the right angle looking at the picture.