good day
I have a problem with my DT 50, the throttle jams at 3000 rpm, I had a look at the linkages on the throttle and the clutch. Motor goes into gear as the throttle lever goes past the clutch linkage it catches the nut on the back of the clutch linkage causing it to jam. I have noticed where the throttle/clutch go onto a spindle there is a bit of play not sure if that is normal, the bolt on the spindle is tight cant seem to take up any play or is this normal.
hope i have described this properly
thank you
Dave
I have a problem with my DT 50, the throttle jams at 3000 rpm, I had a look at the linkages on the throttle and the clutch. Motor goes into gear as the throttle lever goes past the clutch linkage it catches the nut on the back of the clutch linkage causing it to jam. I have noticed where the throttle/clutch go onto a spindle there is a bit of play not sure if that is normal, the bolt on the spindle is tight cant seem to take up any play or is this normal.
hope i have described this properly
thank you
Dave
Comment