DF60A install question

[JBaqua]

I'm having a DF 60 A installed on my 17' Aquasport. I'm posting to ask if anyone can suggest what I need to check or what questions I should ask the dealer to ensure the install was done correctly.

[Moonlighter]

Make sure that once the initial run-in is done and you can give it full throttle that you can get right to the upper end of the rpm range - and that the dealer agrees to swap props until you can.

Also ensure the boat has a water separating fuel filter fitted between tank and primer bulb. Absolutely essential.

[JBaqua]

Thanks for that advice. JB