225hp No power to remote throttle/ start or gauges.

[JohanP]

Hi,

After changing my battery setup I cant start my engine, my gauges are not working neither. Cant figure out why this happened.

Anyone that has experience with this?

Johnson (suzuki) 225 hp 4stroke 2005

[Murray]

https://www.suzukioutboardforum.com/...-power-failure

This might point you in the right direction, if not still worth a read.

[Moonlighter]

Sounds very much like white wire not reconnected correctly or wire is damaged. See the sticky that Murray linked.

[JohanP]

Sounds very much like white wire not reconnected correctly or wire is damaged. See the sticky that Murray linked.

Thank you!
Where will I find this White wire, on the engine end or by the controls?

[Moonlighter]

Most commonly it is connected to the main battery switch + for the start battery, or direct to the start battery itself. Should have a fuse in the line, look for a medium sized blade fuse holder.

The white wire provides power to the ecu. No power to ecu = engine dead, no worky

[JohanP]

Thank you!
I found the white wire. Followed it from the engine and could trace it to the end. Im so happy right now.
Thanks once again. I hope I can help somebody in the future.

[Moonlighter]

Thank you!
I found the white wire. Followed it from the engine and could trace it to the end. Im so happy right now.
Thanks once again. I hope I can help somebody in the future.

So what did you find was wrong?

[JohanP]

The white wire was disconnected.

[Moonlighter]

The white wire was disconnected.

Ok, yes, that will definitely be a problem!

Glad you found it and reconnected.