Tweet
After switching out my old weak battery, I now have no turnover or trim motor operation. I have power to starter solenoid and can hear a click when trim switch is pushed. I have checked under cowling fuses . It seems to me i have power to engine but nothing works. I have checked all grounds on motor. I have manually tripped and reset my main dash breaker, but with key on no gauges or tack movement but all accessories work. Any suggestions as to what I am missing? thank you
-
-
Ck white wire? -
It has power ,thanksComment
-
let me rephrase one end is hooked to the battery ,i assume the other goes to the cpu i can only see about 3 foot before it goes into a wire loomComment
-
no actually the W.W. off the battery goes or should go to the ignition key
there is a inline fuse built in on the WW
you will need to find it
did you read the "sticky" on the White Wire?
ArtComment
-
found the fuse 15 amp and is good .when i pull the fuse it has 12 volts on both sides of the plug like it is back feeding from some whereComment
-
are you sure all the ground wires were reconnected?
almost sounds like the main ground wire from the neg. terminal to the engine is missingComment
-
Seatoy, What did you discover as the issue with the no start?
BriscoeComment
Comment