2" SMIS gauge reset

[Gnwoody714]

I have 2018 DF300AP with the 2" SMIS digital gauge. I was messing with some settings and got the contrast where you cant see the gauge. Is there any way to reset it back to default?
Thanks

[Moonlighter]

Hard Reset (Deletes stored data.)

1. Turn Unit Off (disconnect power from the network)
2. Press and hold the DOWN button.
3. Turn unit on (activate power to NMEA network or connect unit to operating network).
4. Release DOWN button after test screen appears.
5. Turn unit off (disconnect power to NMEA 2000 network or remove unit from network).

[Gnwoody714]

Thanks, I will try it.

[Gnwoody714]

Moonlighter, thanks for the direction. I got it reset today, but had to use the procedure with the up button, not the down. But back in business, all that matters