Tweet
Apologies first if this is something covered to death in other posts.
i have a 1997 dt55 with 250 hours on it , been stored for 3 years , tried to start it not pumping water. prop will no turn even in neutral, removed lower leg still prop wont turn, powerhead spline good, took off pump housing impellor good, drained oil clean no metal.tried to work shift linkage very stiff, moved a couple of times then stuck prop still wouldnt move . drive shaft seems to move antclockwise a bit but not clockwise click at one point on rotation.
any advice would be appreciated,
alex
i have a 1997 dt55 with 250 hours on it , been stored for 3 years , tried to start it not pumping water. prop will no turn even in neutral, removed lower leg still prop wont turn, powerhead spline good, took off pump housing impellor good, drained oil clean no metal.tried to work shift linkage very stiff, moved a couple of times then stuck prop still wouldnt move . drive shaft seems to move antclockwise a bit but not clockwise click at one point on rotation.
any advice would be appreciated,
alex