I think I changed battery switch while engine was running. Now when I turn key on volt meter on dash goes up to about 8 volts then slowly goes to 0 volts. When checking with hand held volt meter 12.5 volts at battery while not running but 13.3 while running so it seems motor is charging batteries. Did I just mess up dash volt meter or is something else going on?
Announcement
Collapse
No announcement yet.
1989 DT200 charging
Collapse
X
-
You might get an inexpensive auto store dc volt meter that would fit in place, and wire it in place of your existing volt meter as a test.
BUT, before doing anything else, look at the back of your meter. May be a rubber plug covering a slotted switch. Notice/mark what positon it is at, then turn it back and forth a couple times, putting it back in its original position. Then see if it does the same thing.
Good luck, post back when able to let us know.
Comment