If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I'm afraid that I don't understand your question. There are three anodes on the DF50...two in the head and one in the block. You have pictured the location of all three.
the first 3 fotos is my motor df 50 2003
thε 4 foto is df 50 foto from internet
not the same motor..but and 2 is df 50
4th photo has anodes (2) head
in my own ... not as if there had never
They have not befriended?
there is a case to be on the river?
there the photo (4th) has two anodes to me there is only metalware (1,2,3 photos)
wants conversion and add Hardware site upstream?
may remain in the separation anodes head ?
If you see photo 1,2,3 and 4 post will see the differences
this motor work at sea and now have 300 hours
It is difficult to tell in your first three photos that there are no anodes in the head. I see where the anode goes in the block, and see that the head is still bolted onto the block, but it is hard to compare the pictures to the view that you show on the head in photo number four. I am not familiar with the DF50, but according to the parts diagrams for the 2003 year model, you SHOULD have two anodes exactly as shown in your fourth photo. And those two anodes should be hidden from view underneath the water hose in the pictures 1,2,3.
Comment