A little back story may help. My lift broke and the motor went under water for a few hours. Took the boat out of the water. Pickled the motor. Before trying to restart, replaced the entire harness, new plugs, new vst tank, checked compression and cleaned all connections.
Motor starts and runs on 3 cylinders. Swapped coils, injectors and camshaft sensors and no change. The motor only runs on the port bank. There is no spark on the starboard bank.
Any ideas what to look for?
Motor starts and runs on 3 cylinders. Swapped coils, injectors and camshaft sensors and no change. The motor only runs on the port bank. There is no spark on the starboard bank.
Any ideas what to look for?
Comment