water in oil and water spraying from exhaust

[linzieh]

been down today and checked the other engine which were identical 4 .67 volts any ideas greatlt received cheers

[redlowrey]

Are you checking the voltage with the plug disconnected and checking the open circuit voltage, if so check the voltage with the plug connected and key on. I went back through some notes and with a temp sensor with 6.5k ohms will produce a signal voltage of 3.5 volts and that will be for a temp of 0 degree's C or 32 deg f. You use the ohm meter to check the resistance of the sensor with the plug disconnected.

[linzieh]

hi there , have managed to check voltage on senders whilst connected and the readings are 3.09 for exhaust and 3.11 for the cyl temp does this sound ok cheers

[linzieh]

readings are 3.11 and 3.09 for exhaust does this sound right please cheers Tom.

[redlowrey]

Those voltage readings look a bit better, check the IAT temp sensor as well in the air box, should be similar to those.