My df115 has stopped "peeing" like when I first got it. It will pee about 6' to 8' and then slack off to about 1'. The water pressure guage reads 8 to 10 psi when it is peeing good but drops to about 1 to 2 psi and the water only goes about a foot. I have flushed the engine, run the engine on muffs for 30 min., have pulled and checked the thermostat, have pulled and cleaned the water pressure valve, and finally have just put in a new impeller. Still have the same problems. The engine will cause the overheat indicator to come on when running above 4300 rpm. We drop to 3800 rpm and never seems to overheat. Help!!! Someone must have a suggestion or solution to my problem.
Thanks,
Old fat guy
Thanks,
Old fat guy
Comment