I changed the oil in my Suzuki df70 1999 model yesterday. The oil was very thick and milky. Ran it after change and it ran OK. Do you think head gasket is blown? Thanks
Announcement
Collapse
No announcement yet.
milky oil in df70
Collapse
X
-
df70, 99, water in oil
Have you done a good compression test on all cylinders? A compression test should tell you if head gasket is bad. Have you looked at plugs after running a few minutes (before they get too hot to handle, or evaporate water) to visually see water on the plugs, or maybe rust if it's older leak?
There are several areas where water can get into a motor, you have a 4 stroke, and that increases the complexities.
Check compression before tearing apart. And ill let someone a bit more familiar with df models respond.
Good luck.
Comment
Comment