Updating SMIS & Engine Interface Software

[yann83]

Hi, after the last simrad update my engine interface on my simarad doesn't work anymore so I wanted to update the SMIS but I am unable to download the update as the link seems dead. My browsers give me choice of other browsers which just open another window. Do you have a zip file link that work? Thanks

[Moonlighter]

Hi, after the last simrad update my engine interface on my simarad doesn't work anymore so I wanted to update the SMIS but I am unable to download the update as the link seems dead. My browsers give me choice of other browsers which just open another window. Do you have a zip file link that work? Thanks

STOP!

Do not update the interface software! You will almost certainly make the situation worse!!

The interface software must match the engine year, and therefore this is a case where running the latest software may not be NOT A GOOD IDEA, IN FACT IT CAN BE A VERY BAD IDEA.

The latest interface software, Version 3.5.07, only works with 2013 and newer engines.

Most likely the issue is that network data sources have been lost due to the Simrad update.

Try this.

Turn engine key to on. Turn Simrad on. In Simrad menu, select system/network/sources. Then pick the option tope left to auto-select sources. It will pop up a notice to make sure all networked devices are turned on, so do that, then proceed to reset sources.

That should fix it.

[yann83]

Did not work, i can see the smis on the device list but is not communicating with the engine (key on). Is a 2015 so the update should eventually work?