Tweet
Hi, I'm new to this forum and have tried to browse for answers on my trim problem with no luck.
I resently installed a used 2010 DF150 on my boat.
Here is the problem:
The trim switch on the motor works fine up and down, the trim switch on the control box only work up. I have tried another control box, but with no luck.
I have locked at the wiring diagram and tuned into the pink wire, the pink one is for down. I checked the continuity in the cable from the 16 pin connector at engine side to the control box and it was fine.
So what to do? Any hints or tricks?
I resently installed a used 2010 DF150 on my boat.
Here is the problem:
The trim switch on the motor works fine up and down, the trim switch on the control box only work up. I have tried another control box, but with no luck.
I have locked at the wiring diagram and tuned into the pink wire, the pink one is for down. I checked the continuity in the cable from the 16 pin connector at engine side to the control box and it was fine.
So what to do? Any hints or tricks?
Comment