Df 300 trim problem

[Pricey10]

Hi I have a 2008 df300. I have no trim Down on my helm controls but still have trim up. The trim up/Down works fine on the switch at the side of the motor. Any ideas? Thank you

[boats.net]

Would probably be a bad switch or wiring at control box if other switch works ok.

[beat to fit]

trim

This happened to me on my Yam before I upgraded to a zuki, switch in the control. It cost me about $75...

[kmoose]

Check to see if one of the trim wires is broken under the cowl. Have a friend with two of them and it has happened to both.

[Choppy]

We reprogrammed a EEC and had an issue with the trim. Put it back on the computer and reprogrammed all including up and down trim and it fixed the problem