90DF Mounting Question

[Eric Wagner]

Hello! need to mount a 90DF on a boston whaler. I have to drill new holes for the two bottom bolts. Is a template available for drilling the holes? The dealers use one but I want to do it myself. Thanks, Eric

[noelm007]

seeing as there is only two holes, put the motor in position and just mark them from the motor and drill them.

[Eric Wagner]

Thanks! I'm considering doing that. This is an older whaler and the bottom two hole locations, if drilled, will obstruct a small well on the inside of the transom. The angle when I drill from outside to inside has to be spot on. Maybe use a drill guide of some kind to maintain a straight bore. thanks, Eric