Trim motor

[hadaveha]

I have a 1990 dt75 im getting nothing out of the trim it doesnt make a sound up or down checked all conections everything is tight. fuses are in good shape any clue what to check now

[boats.net]

Check to see if getting 12 volts to small green(down) and blue(up) wire at trim relay when trim switch is activated, relay should click. If do then remove large wires from trim relay that go to trim motor, connect those wires direct to a 12 volt battery and trim motor should run, if not trim motor is bad.

[hadaveha]

im getting no clicking at the relays im getting nothing

[boats.net]

Do you have 12 volts at red wire to relay? are you getting 12 volts to green and blue wires when trim switch is on?

[hadaveha]

yes I am getting 12v at the red wires comming into relays, im getting 12v comming out of relays on the small blue and green, but no volts on the small blue and green comming into the relays with the switch up or down

[hadaveha]

and i am getting no sound what so ever out of the relays

[boats.net]

Then have problem with switch or wiring between switch and relay.