Suzuki 65hp 1995

[welshspringer]

Hi

New to this forum, I am hoping someone may be able to help me.
I have a Suzi 65 - 1995 vintage. Problem is with (I think) the ignition switch, on initial turn (from cold) of the key there is no response, after a few tries the starter motor will turn, after a couple of more turns the response is for the motor to fire up. I am expecting one day that there will be no response to turning the key. Any one had the same problem, if yes, would appreciate if you could help me.
gd

[boats.net]

You can take switch out and test it with continuity checks to each circuit.

[welshspringer]

Trim sender

Hi
Thanks for the info on the ignition switch, yet to try, motor is 50 miles away from home
Also my trim sender has snapped, I think the part number is 34801-95310 or 34801-94710 Is it possible to purchase either new or second hand?
gd

[welshspringer]

At last,after being told by a Suzuki "spe******t" that the ignition switch never fails. I took the bull by the horns and ordered a new switch from Cambrian Marine, delivered the following day - fitted following day. Since then engine starts first time no faltering at sea, now have confidence with the engine.
Still looking for a trim sender.
gd

[welshspringer]

At last,after being told by a Suzuki "spe******t" that the ignition switch never fails. I took the bull by the horns and ordered a new switch from Cambrian Marine, delivered the following day - fitted following day. Since then engine starts first time no faltering at sea, now have confidence with the engine.
Still looking for a trim sender switch..
gd

[welshspringer]

found trim sender on e bay. made from metal not plastic at a third of the cost of a Suzuki part. In my opinion far better quality, made I think in Cornwall.