Tweet
Getting error code 3 3 which is the neutral sensor. The motor was left in idle at the ramp will backing car in. When I got back motor had stalled with 3 3 flashing. I need both motors to get it on the trailer. I tried starting it but it would only crank and not fire. Seems Abit strange it would crank at all with the sensor alarm. What I would like to know is why won't it fire.
-
-
ok so i just checked and i have no spark. would the alram contribute to this -
check both neutral switches there's one in the lever box and one at the engine.
RalfComment
-
I don't think the neutral switches control spark, the control power to the key/starter to prevent starting in gear, more than likely the (I think) crank position sensor, it dies while the motor is running and all is good, but the motor will never start again, there was a thread on here about it recently.Comment
-
Comment