1987 Suzuki DT150 Head Covers

[dougjaco]

I am looking for 2 reasonably priced head covers for a 1987 DT150. I had frozen bolts shear off in both of mine and destroyed one of the bolt holes trying to drill out the first one.

It appears that these covers were the same on the DT150, 175 and 200 from 1987 to 94, with the caveat that in 89 or 90 they added an additional water temp sensor... I am hoping that the design is such that this is intended to be plugged for an engine that doesn't support that additional sensor.
------------------------------------------------------
I erred in my description. The bolts sheared off in the heads, not the head covers. So, I'm looking for a pair of used heads for a 1987 DT150, or at least a port side head. I may also be looking for a used lower unit if I cant get the bearing carrier to break free.

[boats.net]

11100-87811 Cylinder Cover is currently on backorder, you call boats.net at 877-408-1499 for an estmated ship date.

[dougjaco]

correction to earlier posting

I erred in my description. The bolts sheared off in the heads, not the head covers. So, I'm looking for a pair of used heads for a 1987 DT150, or at least a port side head. I may also be looking for a used lower unit if I cant get the bearing carrier to break free.

[dougjaco]

Part clarification on gear case for Dt150

I looked up the part referenced in the boats.net reply and it appears that is for the 'gearcase housing'... not the complete gearcase. Am I reading that incorrectly?

[boats.net]

No that is correct.