My 140 does nothing when I turn on the key. No beep nada. The battery is fully charged and terminals are clean (battery fuse is good). The engine main and sub fuses are good, I function tested the neutral switch and ingnition switch, perfect. The starter relay operates correctly when I remove it from the motor, but it does not click when I turn on the key (as well as no buzzing. The tach gauge has off as it shows 2000 rpms and the fuel gauge is way past full. In line fuse for power to gauges is good.
I looked through the threads and saw no info on this isssue. Any suggestions, this is crazy!
Thanks for your help
Briscoe
in TX
I looked through the threads and saw no info on this isssue. Any suggestions, this is crazy!
Thanks for your help
Briscoe
in TX
Comment